The nextbox n300 boost range extender is the best device for boosting the network in dead areas. This repeater also provides you with a boost network in the dark area. Two internal high range antennas convert the range into the boost network. Type http //re.nextbox.home login to access nextbox login. In this repeater you get 2.4GHz, 300Mbps and 5.8GHz, 867 Mbps coverage up to the speed. Wide and LAN connection both are included in this device. As well as you are able to connect multiple devices with this repeater very easily. Two LAN ports for wired connection. You get the range of this extender network in the 3000sq.ft area, 360 degree network coverage in the rooms or other places. The nextbox n300 extender provides the best security to the network with the1200 Mbps chip amplifier. Easy to connect with the router.
Quick setup nextbox n300 wifi repeater through the WPS button.
- If you want to set up your extender through the wireless method, follow the mentioned steps one by one.
- First of all, if you have a new nextbox n300 wifi extender, unbox it and plug the repeater in the wall electric outlet near to the main router.
- New you need to locate the repeater in the router range coverage area.
- Then press and hold the WPS button on the router and wait for 2 to 3 seconds.
- If there is a router LED light solid on , then release the WPS button of the modem.
- New, press the WPS button of nextbox n300 boost range extender within the 6 seconds after flashing the router LED light.
- Then again wait to flash the extender LED. Then the nextbox wifi extender setup through the WPS button was successful.
- Next open the mobile or laptop, go to the network wifi list and look at the SSID of the extender.
- Tap on it, and go to the wifi setting set password for it.
- Then again open the wifi list and enter the password.
Note: After setup unplug the repeater and plug in the middle of the router and device.
Easy and fast steps to login the nextbox n-300 boost range extender. Fix method!
After setting up your wifi repeater, proceed for nextbox n-300 boost range extender login to your device so that you can configure the settings of your wifi extender. After log in, you can also able to check the status of the wifi repeater:
Step1. You need to switch on your PC and phone.
Step2. Then open any web browser (Google, firefox, opera,ect)of your choice.
Step3. Next, In the browser URL bar , type the ip address and Tap the enter key.
Step4. After that the login page displays on the computer or mobile screen.
Step5. Then you need to put the Username and password “admin” both are the same as the nextbox n300 boost range extender to login into the admin panel of the repeater.
Step6. New you need to tap on the below LOGIN option.
Finally your nextbox extender will be logged in.
How to check the router range network connection on the extender?
- If you want to check the range of your router, launch any web browser and login the repeater in your computer or laptop.
- Then a status page display.
- New you find the setting and tap on the setting option.
- Next, go to the network setting.
- After that, look at the wifi list and open it.
- In the wifi list find the SSID of the router.
- Finally check the signal status. I hope your router gives your extender the boost signal.
- If the signal is weak, locate the repeater anywhere the router network boosts up.
Nextbox WiFi Extender Firmware Update Fix Methods.
- If your extender keeps disconnecting and does not work properly. Then you update the firmware of your device quickly and reset it.
- First , login the repeater in the computer for login your device see the upper information.
- New you see the status page and select the setting.
- Then in the setting go to the update option and open it.
- Next you need to find the update firmware.
- Then check the firmware update and install it, it takes some time so wait for some time.
- After installation click on the continuation.
- Finally firmware will be updated.
re.nextbox.home | nextbox wifi extender 